Structural Steel & Beams
Cleaned and prepped for welding, assembly, or coating, whether it's new fabrication or older steel that needs the rust taken off.
Industrial
Industrial Blasting and Surface Prep in Tampa
Mobile blasting for structural steel, tanks, and heavy equipment. We strip rust, old coatings, and buildup down to a clean surface that's ready for paint, and we come to your site anywhere in central Florida.
Why Prep Matters
Surface Prep Done Right the First Time
On industrial jobs, a coating is only as good as the surface underneath it. If rust, old paint, or buildup gets left behind, the new coating fails early and you end up paying to do the job twice. Blasting strips the surface back to clean, sound material so paint and protective coatings bond properly and hold up in the field.
We bring that work to you. Our setup is fully mobile and completely self-contained, so we can prep steel, equipment, and structures right at your facility or job site without tapping into your power or water. Florida's heat, humidity, and salt air are hard on industrial coatings, which makes solid prep even more important here than in most places.
What We Blast
What We Handle for Industrial Clients
From a single steel beam to a yard full of equipment, we handle the surfaces industrial work depends on.
Tanks & Vessels
Interior and exterior surfaces stripped of old coatings and corrosion, then made ready for relining or repainting.
Heavy Equipment
Rust, grease, and failing paint removed so your machinery can be recoated and put back to work.
Coating & Paint Removal
Old industrial paint, powder coat, and failed coatings taken off cleanly without chewing up the material underneath.
Weld & Fabrication Prep
Surfaces cleaned ahead of welding and assembly so your crew starts with bare, sound material.
Rust Removal & Restoration
Corrosion stripped back before it spreads and weakens the metal.
Who We Work With
Built for the Trades
We work with the businesses that keep industrial Florida running, including welders, pipe fitters, fabrication shops, equipment owners, and contractors handling large-scale projects. If you have a surface that needs to be clean and sound before the next step, we can prep it.
How We Blast
The Right Media for the Job
Industrial surfaces are not all the same, and neither is the right way to blast them. Our machine runs everything from heavy abrasives for thick rust and buildup on structural steel to softer media for thinner metal and more delicate work. We match the blast to the material and to the coating you plan to put on it, so the surface comes out the way the job actually needs.
Dustless When You Need It
When you need to keep working, our dustless option keeps airborne dust and cleanup to a minimum. That lets us work indoors, around active operations, or near other equipment without shutting your whole site down.
Why Blastworx
Why Industrial Crews Call Blastworx
We Come to You
Fully mobile and self-contained, with no need for your power or water.
Less Downtime
On-site prep means your steel or equipment doesn't have to leave the yard.
Dustless Option
Cleaner work around active operations and indoor spaces.
Any Media
Matched to the surface and the coating you're using.
Ready for Coating
We can apply the paint or protective coating too, when you need it.
Fully Insured
Your facility and equipment are covered while we work.
Testimonials
What Our Customers Say
"We had a load of structural steel that needed the mill scale and rust knocked off before coating. Blastworx came to our yard and had it blasted and ready the same day, and the coating's holding up great."
"Matt blasted a batch of weldments for us down to clean, bright metal so our guys could start fresh. Saved my crew hours of grinding and the welds came out cleaner for it."
"I run a small landscaping crew and had a trailer and a few mowers eaten up with rust. Blastworx came to the yard and handled all of it on-site for a fair price."
"We needed an old tank stripped inside and out before relining. They matched the media so they didn't thin the walls, and it was ready for the lining crew right on schedule."
"We needed equipment cleaned up inside the shop and couldn't have dust everywhere. The dustless setup kept it clean and we barely had to stop working."
How It Works
4 Easy Steps
We keep it simple and honest. You always know what's happening and what it costs before we start.
Step 01
Walkthrough
Send us photos or have us out to your site, and we'll figure out the right media for the surface and the coating you're using.
Step 02
Free Estimate
You get a clear, written estimate the same day, and the price we give is the price you pay.
Step 03
Blast & Prep
We protect the surrounding area, then blast the surface clean right at your facility or job site.
Step 04
Ready for Coating
Your steel or equipment comes out clean and ready for paint. Hand it to your coating crew, or have us apply it for you.
Good to Know
Before You Book
A few things customers ask most. Anything else, just call or text and we'll talk it through.
Do you need our power or water hooked up?
Nope. The rig is fully mobile and self-contained, so we roll in with our own air, media, and everything else the job takes. You don't have to run a line or free up an outlet for us; we show up ready to work.
Can you work without shutting our operation down?
That's exactly what the dustless option is for. It keeps airborne dust and cleanup to a minimum, so we can work indoors, around active lines, or right next to other equipment without you having to stop production across the whole site.
How do you know which media to use on our steel?
We match it to the surface and to whatever coating goes on next. Thick rust and buildup on structural steel take a heavier abrasive; thinner metal and finer work call for something softer. The goal is bare, sound material ready for your coating, not a one-size-fits-all blast.
Do our beams and equipment have to leave the yard?
No, and that's usually the whole point. We bring the rig to your steel or your machinery and prep it right where it sits, so nothing gets trucked off-site and your downtime stays short.
Once it's blasted, can you coat it too, or just strip it?
Either one. Plenty of clients just want the surface stripped and prepped for their own crew. When you'd rather we carry it through, we can lay down the paint or protective coating right after blasting so bare metal isn't left exposed. Tell us where you want the handoff.
Are you insured to work on our site?
Fully insured, yes. Your facility and equipment are covered the entire time we're on the job, so bringing us into an active industrial site is one less thing you have to think about.
Free Estimate
Get Your Industrial Blasting Estimate Today
Tell us about the job and send a photo if you have one, and we'll get back to you the same day with a free estimate.